Insulating Glass Hot Melt Butyl Sealant
Model No.: HH 888
Brand: HH
Place of Origin：China
Wet: 28kg/bag
Payment Type：LC,T/T
Incoterm：FOB,CFR,CIF,EXW
Min Order：1 bag
Port: Qingdao,Shanghai,Tianjin
1.Introduction of the product
Use butyl adhesive coating equipment specially designed for insulating glass production lines. The specific use conditions can be achieved by adjusting the temperature and pressure. The recommended gluing temperature is 110-140℃, and the construction environment temperature should not be lower than 5℃. Before loading into the glue tank, make sure the glue surface is clean and free of foreign matter. Clean, dry and remove dust, oil and fat from all glass surfaces to be bonded.
2.Product advantages
(1) Maintains its plasticity and sealing properties over a wide range of temperature range.
(2) Excellent adhesion to glass, aluminium alloy, galvanized steel and stainless steel.
(3) Minimum moisture vapour and gas permeation.
(4) Easy to operate.
3.Product parameters are as follows
Test ltems | Test Results |
Color | Black |
Specific Gravity | 1.20-1.30 g/cm3 |
Solid Content | 100% |
Temperature Resistant Range | -40℃~130℃ |
Maximum Temperature Bearable | 160℃ |
Working Temperature Range | -20℃-80℃ |
Shear Strength | 0.13Mpa |
Water Vapor Transmission Rate | 0.90g/m2 d |
Thermal Weight Loss | 0.1% |
4.Transportation and Packaging
5.FAQ
